Electric Insulated Food Transport Box 90L With Energy Efficient Heater

Heated food carrier, heated food pan carrier, electric food pan carrier, electric food transport carts
 
DESCRIPTION
With an energy-efficient heater built right into the door, the electric food pan carrier takes legendary TOPGREEN performance to the next level. Designed for gentle, non-radiant heat to protect, not dry out carefully prepped food, this carrier is ideal for long transport times and limited access to electrical outlets during banquets and outdoor events. Our thick CFC-free insulation safely holds prepared foods for 4+ hours without electricity, with a quick one-hour preheat and three-minute heat recovery time when plugged in. Rotomolded for one-piece, seamless construction, this Heated food carrier features ergonomic, unbreakable molded-in handles and a convenient nylon latch for fast access. Equipped with two fixed and two swivel casters with one brake for easy maneuvering. Select a hot holding cart that’s as versatile as your meal service.

SPECIFICATION

 
(一) Install
Place the electric food transport carts on the flat and firm ground
(二) Inspect and debug
After the new food container is placed steadily, it should be checked and debugged before use. The first is to carefully check whether the fasteners on the insulation box are loose, and if necessary, they should be tightened; the second is to check whether the door of the box is easy to open; the third is to check whether the inner container and power cord in the box are complete; the fourth is to check the box whether there is any foreign matter inside. Fifth, check whether the sealing strip has come off.
(三 ) Operation
1. Keep the hot food
Open the door of the container, put the hot lunch, hot rice, hot dishes and other foods in the container, close the door of the box, and fasten it with a latch.
2. Heating the food
Operation menu
(1) "Shutdown button": In the power-on state, press this button to turn off with one key;
(2) "Power": here is the power indicator, the light is on to indicate the power-on state, otherwise it is the power-off state;
(3) "Temperature inside the box": when this light is on, it indicates that the display area is the temperature inside the heating box;
(4) "Set temperature": when this light is on, it indicates that the display area is the set temperature value, and the temperature adjustable range: 30℃～80℃;
(5) "Setting": It is the setting button, press to switch between the set temperature and the ambient temperature;
(6)  "+": When setting the temperature, increase the temperature with the key;
(7)  "-": When setting the temperature, use the key to decrease the temperature.
(8) When in use, put the food to be heated into the warming box, close the door and fasten it, plug in the power cord, press the red button in the lower left corner of the door to start heating, after the heating is completed, it can automatically enter the warming mode, After the temperature is lower than the set temperature, it will continue to heat, so that the food can always be kept at the optimal temperature, which is convenient for eating at any time.
 
REFERENCE TEMPERATURE CHANGE WITHOUT ELECTRIC

OUR EQUIPMENT

 
FAQ
Q1: What's your company's main products?
Our company is specialized in producing the rotational molding moulds and rotational products. We have insulated food pan carriers, insulated box, insulated soup barrel, cooler box, dish caddy, ice caddy and tool box available to sell. We can also customized all kinds of rotomoulding products according to your requirements or 3D design drawing.
Q2: What is your payment terms?
If mould: 50% deposit in advance ,50% before shipment
If product: 30% before shipment, balance should be paid before delivery
Q3: What is your delivery time?
The delivery time is around 15-30 days after receipt of payment.
Q4: How can I place order ?
Sign contract-- Pay deposit-- Production--Pay left balance--loading -- Delivery
Q5: What information should I let you know if I want to get a quotation?
If mould:
Please send us some pictures and designs for checking. lf you only have product pictures.we can design the drawing.
Product:
1. Please send us some pictures or drawing to checking if possible so we can do best as your request. Otherwise, we will recommend relevant products with details for your reference.
2. lf the quantity is large enough. we will make the mould based on your requirements, then produce for you. Otherwise, you have to bear the cost of the mould by yourself.
Q6: Are you willing to send sample for me?
Of course. If you decide to make a new mould in our factory, we can offer you one piece of free sample, but the freight is
collected.
Q7: Is it possible to visit your factory?
Our company is located in Fengxian district,Shanghai,China. It is very convenient to visit us, and all clients from all over the
world are highly welcome to us. We warmly look forward to your visiting!