|
Product Details:
|
| Capacity: | 90L | External_dimension: | 635x460x640mm |
|---|---|---|---|
| Internal_dimension: | 545x335x500mm | Body_material: | Food-grade LLDPE, Rotomolded One-piece Double Wall |
| Insulation: | High-density PU Foam, 30mm | Pan_capacity: | 5 X 65mm Full Size Or 10 X 65mm Half Size GN Pans |
| Door: | Front Loading, Fold-flat 270 Degrees, Detachable | Latch_gasket: | Wide Nylon Snap Latches, Silicone Gasket |
| Casters: | 4 X 100mm Smooth Rolling Swivel | Temperature_hold: | Hot Above 60C / Cold Below 5C Up To 6 Hours |
| Highlight: | 90L insulated catering box wheeled,PE rotomolded hot food transport container,635x460x640mm insulated food pan carrier |
||
This 90L catering box is the container that keeps a buffet line running when the kitchen and the guest are in two different buildings. It is a passive insulated cabinet with a 90 litre cavity, a fold-flat front door and four smooth-rolling casters, built from a single seamless rotomolded LLDPE shell filled with 30 mm of high-density polyurethane foam. Load it with pre-heated food pans, close the two wide nylon latches, wheel it to the venue, and the contents stay above 60 C for up to six hours with no power cable, no gas and no generator on site.
The internal chutes accept standard Gastronorm pans, five shallow full-size pans or ten half-size pans, which means one box can carry a complete menu of mains, sides and sauces for a forty to sixty cover event. The door swings 270 degrees and folds flat against the body, so a steward can reach any pan position without moving the cabinet, and a pop-up vent releases steam so fried and baked items do not go soggy in transit. Every outer surface is smooth, non-porous and watertight, so the box can be washed down and re-loaded inside fifteen minutes between two events on the same day.
Key Features| Parameter | Specification |
|---|---|
| Model | FB90B-1 |
| Capacity | 90 L / 95 QT |
| External Dimension | 635 x 460 x 640 mm (63.5 x 46 x 64 cm) |
| Internal Dimension | 545 x 335 x 500 mm |
| Carton Dimension | 645 x 465 x 645 mm |
| Net Weight / Gross Weight | 15 kg / 17 kg |
| Body Construction | One-piece seamless double-wall food-grade LLDPE |
| Insulation | High-density polyurethane foam, 30 mm |
| Pan Capacity | 5 x 65 mm full size or 10 x 65 mm half size GN pans |
| Door | Front loading, fold-flat 270 degrees, detachable |
| Latch and Gasket | Wide nylon snap latches with silicone gasket |
| Caster | 4 x 100 mm smooth-rolling swivel casters |
Catering companies use this box for off-site events, wedding and conference banqueting, corporate lunch deliveries, school and hospital meal rounds, sports hospitality suites and film set catering. It is equally at home on a temporary buffet line where pans are swapped during service, and in a satellite kitchen where food is held warm for a second sitting. Because the box is non-electric and watertight, it also suits mixed hot and cold menus, chilled dessert transport and cold-chain staging before a plating window opens.
Packaging & Quality AssuranceEach catering box is packed one piece per PE bag with corner protection inside a five-layer export carton of 645 x 465 x 645 mm at 17 kg gross, approximately 110 pieces per 20GP and 270 pieces per 40HQ, with mixed loading of heated carriers, soup carriers, beverage dispensers and cooler boxes available. Production and final inspection are carried out by SHANGHAI TOPGREEN INDUSTRIAL CO., LTD in its own rotomolding plant, where the mould, the foam injection, the hardware and the export packing are controlled in one facility rather than assembled from bought-in parts. Each lot passes a wall thickness audit, a foam density check, a latch cycle test, a loaded caster roll test, a temperature hold verification with a data logger and a packed carton drop test. The box carries a twelve month warranty on shell, door hardware and casters, and gaskets, latches, vent caps and wheels are stocked as after-sales spares. Custom colours, embossed logos, printed front panels, private-label manuals and customer carton artwork are supported for OEM programmes, and a pre-production sample can be supplied before a bulk run is released.
Contact Person: Wendy
Tel: 86-17701217356
Fax: 86-021-80127278